Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Ontario, CA
DuraFlex chimney cleaning in Ontario costs between $189 and $329 for a standard inspection and sweep, and we’re the independent crew that actually understands what Ontario’s windblown grit does to these liners. most sweeps in the Inland Empire will brush a DuraFlex liner the same way they’d brush a clay tile, but our DuraFlex service in Montclair and Ontario’s east-side homes near the 60 freeway collect a reddish dust-and-creosote mix that hardens differently and needs a different pass. That’s the difference we bring.
We install, inspect, and clean DuraFlex stainless liners, caps, and reline kits across Ontario’s 91764, 91798, 91758, and 91761 ZIP codes. If your liner was put in years ago and hasn’t been looked at since, call (866) 285-4905 for a free estimate. We’ll tell you what’s inside before we touch it.
Why Ontario Residents Choose Us for DuraFlex Service
We’re not a manufacturer-authorized shop, and we won’t pretend to be. We’re an independent chimney service crew that works on DuraFlex prefab and reline systems every week, so we know their stainless liners, caps, and component fitment from the inside out. Our credibility comes from field experience in Ontario’s housing stock, not from a badge. DuraFlex sales & service is what we do, but the expertise comes from pulling hundreds of these liners out of 1950s and 1960s tract home flues and seeing what Ontario’s climate actually does to them.
Gil Trevino, our owner, grew up off Mission Boulevard near the old Jurupa Hills area and has spent nearly two decades working on chimneys across the Inland Empire. He’ll name the part, describe what failed, and tell you exactly what goes back in its place. His daughter grew up watching him load rotary cleaning rods into the van every morning, and he half-jokes that she can identify a smoke chamber offset by ear before he can get his flashlight aimed.
When we open a DuraFlex liner in Ontario or provide DuraFlex repair in Chino, we know what to look for: wind-driven grit packed against the top plate, cap screens clogged with dormant-summer debris, and abrasion marks where a cracked clay tile has been rubbing against the stainless. We clean the whole system, not just the visible section.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Ontario
- Santa Ana grit packing against the top plate and cap screen. Ontario sits in the path of wind-driven dust from the Cajon Pass and Santa Ana corridors. That fine reddish grit mixes with creosote at the flue top and restricts draft. We pull the cap, clear the screen, and check the top plate gasket for wear.
- Expansive-soil tile cracks abrading the flexible liner. Ontario’s 1950s – 1970s tract homes sit on soils that shift. When the original clay flue tiles crack, the DuraFlex liner can contact rough edges and abrade or kink during service. We inspect for those contact points before running brushes through.
- Dormant-summer debris blocking the first burn. Ontario’s long, hot summers mean fireplaces sit unused for months. Bird nests and leaf load drop onto the liner and block the first burn of the season. We clear it before you light anything.
- Cap and top-plate fastener corrosion after temperature swings. Ontario summer days regularly exceed 100°F while winter nights dip into the 30s. That thermal cycling loosens and corrodes cap fasteners, letting rain and dust into the liner annulus. We check every fastener on every visit.
- Reddish grit-and-creosote mix that hardens differently than plain soot. On Ontario’s east side, near the 60 freeway, we routinely find creosote laced with windblown grit that sets up harder than typical soot. It needs a different brush pass and a careful inspection, not a standard sweep.
DuraFlex Service in Ontario: What Local Conditions Mean for Your Equipment
Here’s the thing most generic DuraFlex pages won’t tell you: Ontario’s east-side homes near the 60 freeway routinely accumulate creosote laced with reddish windblown grit that hardens differently than plain soot, so we scrape and evaluate DuraFlex liners there with a different brush and inspection pass than west-side homes. The grit comes from the Santa Ana winds pushing fine dust down uncapped chimneys along the foothills, and it bonds with creosote into a dense, crusty layer that a standard poly brush will skate right over. If you live east of the 60 corridor in 91761 or 91762, your liner probably has this condition. We’ve seen it on hundreds of homes, including a 1960s single-story tract house off East Holt Boulevard where the cap screen was packed with leaves and red windblown grit after a dormant summer. We pulled the cap, ran a Level 2 inspection, cleared the grit-and-creosote mix from the liner, and installed a replacement cap with a tighter screen. The first burn drafted clean that evening. That’s the level of local knowledge we bring to every DuraFlex job in Ontario.
DuraFlex Models & Products We Service in Ontario
We work on the full DuraFlex stainless line: the round and oval flexible chimney liners, the Pro and ProFlex series, reline kits with top-plate and cap assemblies, and multi-flue or custom cap systems. For fitment-critical parts like top plates, caps, and liner connectors where UL listing matters, we fit genuine DuraFlex components. For non-structural hardware like fasteners and clamps, we use quality aftermarket parts when they’re equal or better. The repair-vs-replace decision is simple: if the liner and cap are sound, we repair. If abrasion, kinks, or failed joints make repair unsafe, we replace. No upselling, no mystery recommendations. Just a clear explanation of what’s inside and what it needs.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Ontario
A standard DuraFlex chimney cleaning and inspection in Ontario runs $189 to $329 depending on liner condition and accessibility. If we find cap damage or need to pull the top plate for cleaning, that adds to the bill and we’ll quote it before touching anything. Creosote that’s hardened with grit takes longer to remove, which is why east-side Ontario homes sometimes land on the higher end of that range. Your free estimate includes a visual inspection and a straight answer about what we found. Call (866) 285-4905 and we’ll give you a real number, not a vague range.
Serving Ontario, CA – Our Local Coverage Area
We’re based in the Ontario area and know this community well, and we also offer DuraFlex in Upland. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Ontario
Once a year at minimum, and ideally right before your first fall fire. Ontario’s burn season is compressed into a few cold months after a long dormant summer, and the first burn is when all that debris and windblown grit becomes a problem. Sweep before you light anything, and you’ll never deal with a blocked flue on the coldest night of January. Call (866) 285-4905 to schedule before the season starts.
No. We’re an independent chimney service company that works on DuraFlex systems regularly, but we have no manufacturer authorization or warranty endorsement. What we have is field experience with DuraFlex liners in Ontario’s specific housing stock. If you need warranty work, contact DuraFlex directly. If you need a straight diagnosis and a fix, we’re your crew.
We use genuine DuraFlex components where fitment and UL listing matter: top plates, caps, and liner connectors. For non-structural hardware like fasteners and clamps, we source quality aftermarket parts when they’re equal or better. You’ll always know exactly what’s going into your chimney, brand by brand.
We service the full stainless steel flexible liner line, including round and oval configurations, Pro and ProFlex series, and multi-flue or custom cap systems. If it’s a DuraFlex product installed in an Ontario chimney, we’ve likely worked on it and can clean, inspect, or repair it, and we also handle DuraFlex repair in Claremont.
Standard cleaning runs $189 to $329 depending on liner condition, grit buildup, and access. East-side homes with hardened grit-and-creosote mixes tend toward the higher end because the removal takes longer and needs a different brush pass. Your free estimate tells you the exact number before work starts. Call (866) 285-4905 for a free estimate.
Service Areas Near Ontario
We serve Ontario and the surrounding Inland Empire communities, including Ontario service area coverage that stretches into Fontana and Rancho Cucamonga. We also cover Jurupa Valley, Riverside, and Corona for DuraFlex cleaning and repair. If you’re within reasonable driving distance of Ontario, we’ll come out and take a look.
Book Your DuraFlex Service in Ontario Today
Your DuraFlex liner is sitting in an Ontario chimney right now, collecting whatever the Santa Ana winds and dormant summer left behind. We’ll clean it, inspect it, and tell you exactly what condition it’s in. Call (866) 285-4905 for a free estimate, and we’ll get you scheduled before the first cold night. If we can’t see clean liner from the firebox to the cap, we’re not done yet.
Written by Gil Trevino, Owner at Chimney Sweep Jurupa Valley, serving Ontario since 2006.